weberset x'tra flex (LD)

New Product

Excellent performance,low dust, mono component thin thick latex fortified cement based Ceramic Tile & Stone Slab Adhesive

25 KG / Bag

Dokumentasi dan katalog

Mengetahui sebelum memasang

  • Substrate must be dry, sound, flat / true & free of contaminants.
  • Ceramic Tiles are to be fix dry. Do not soak in water.
  • Mix weberset x'tra flex (LD) with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
  • Spread adhesive to the substrate at bed thickness of 6 - 15mm (may vary depending on tile size & thickness) with suitable notched trowel.
  • Spread no more than 1 m2 at a time to avoid Skin-Over. 
  • Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.
  • Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
  • Allocate joints of approx. 3mm wide between tiles.
  • Remove surplus adhesive from tile surface & joints before it hardens.
  • Set for 24 hours; before grouting commences.
  • Do not use adhesive in temperatures lower than 5ºC or in damp condition.

Consumption is not availble, please have a look at the PDF documentation

Ciri-ciri dan manfaat

  • Safer working condition
  • Healthy working environment
  • Excellent bonding strength
  • Suitable for installation of large Format Wall Tile
  • Good workability


  • Bed thickness : 3 - 6mm
  • Open time : Approx. 30 Minute
  • Setting time : 24 hours
  • Adjustability Time : 20 minutes – May vary depending on porosity of substrate.
  • Mix Proportion : 1 pbw water to 3 pbw adhesive (6 - 7 ltrs Water or Latex Admixture to 20kg weberset x'tra flex (LD))
  • Application Temperature : Above 5°C - 40°C
  • Shelf life : 6 month