weberdry WP slurry

waterproofing, bathroom

Medium elastomeric cementitious, two-component, coating for interior and exterior waterproofing system complied with class JS of JC/T 894

15 KG / Bag (Powder)

6 Ltr / Drum (Liquid)

Documentation and brochures

To know before applying

  • Substrate must be free from grease, mould oil, rust, rusty metal, and all contamination on any traces of foreign materials affecting the adhesion of E.MIX ES 100
  • Pre-soak the substrate with water
  • Mix the admixture with the powder component and stir with electrical mixer until lump free
  • Apply the slurry onto substrate by using block brush, squeegee or reller in 2 layers stiffling action. Second coat must be applied after the first coat is dried approx. 3 - 4 hours

(Please refer to our Technical Data Sheet or Method Statement for procedures in detail)

Consumption is not availble, please have a look at the PDF documentation

Features and benefits

  • Excellent crack bridging capability
  • Applicable under high humidity environment 
  • Applicable for substrates with complex surfaces and shapes

Constraints

Latex Admixture ration : Approx 18 litre / 25kg bag Pot life : Approx 2 hours Coverage : 14 - 19 m² / package Thickness 1.0-1.2mm (2 coats) Curing time : 7 days Recommended to wear NIOSH approved or equivalent particulate face mask when mixing the material.

This product fits for these following projects