weberset superflex 21
Product formerly named: BELCEM SUPERFLEX 21
Tile adhesive for large Porcelain tiles on wall and floor.
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset superflex 21 with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
- Spread adhesive to the substrate at bed thickness of 3– 6 mm (may vary depending on tile size & thickness) with suitable notched trowel.
- Spread no more than 1 m2 at a time to avoid Skin-Over.
- Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.
- Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
- Allocate joints of approx. 2 – 3 mm wide between tiles.
- Remove surplus adhesive from tile surface & joints before it hardens.
- Set for 24 hours; before grouting commences.
- Excellent bonding performance
- Low wall tile slippage
- Excellent bond strength (x>2.0N/mm2)
- Bed thickness : 3 - 6mm
- Application temperature above 5°C-50°C
- Open time Approx. 20 - 30 Minute
- Setting time is 24 hours
- Adjustability Time : 15 minutes – May vary depending on porosity of substrate.
- Mix Proportion : 1 pbw water to 3 pbw adhesive (6 - 7 ltrs Water or Latex Admixture to 20 kg weberset superflex 21)
- Shelf life : 6 month
Tutorials and videos
Case studies
