weberset easy flex

Tile adhesive for porcelain tiles
Read more
Read less

Description

  • Substrate must be dry, sound, flat / true & free of contaminants.
  • Ceramic Tiles are to be fix dry. Do not soak in water.
  • Mix weberset easy flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
  • Spread adhesive to the substrate at bed thickness of 3 - 6mm (may vary depending on tile size & thickness) with suitable notched trowel.
  • Spread no more than 1 m2 at a time to avoid Skin-Over. 
  • Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.
  • Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
  • Allocate joints of approx. 3mm wide between tiles.
  • Remove surplus adhesive from tile surface & joints before it hardens.
  • Set for 24 hours; before grouting commences.

Key Facts

  • Good quality C2TE tile adhesive
  • Good bond strength (x>1.5N/mm2)
  • Applicable for wall and floor tile

Application

  • Bed thickness : 3 - 6mm
  • Open time : Approx. 15 Minute
  • Setting time : 24 hours
  • Adjustability Time : 25 minutes – May vary depending on porosity of substrate.
  • Mix Proportion : 1 pbw water to 3 pbw adhesive (7 - 8 ltrs Water or Latex Admixture to 25kg weberset easy flex)
  • Shelf life : 6 month

Documentation

weberset easy flex_0320_R03