weberset super star (LD)

New Product Product formerly named: BELCEM SUPER STAR (LOW DUST)

Premium grade thin thick bed low dust cement based Ceramic Tile and Stone Slab Adhesive for internal and external

Documentation and brochures

To know before applying

  • Substrate must be dry, sound, flat / true & free of contaminants.
  • Ceramic Tiles are to be fix dry. Do not soak in water.
  • Mix weberset super star (LD) with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
  • Spread adhesive to the substrate at bed thickness of 6 - 15mm (may vary depending on tile size & thickness) with suitable notched trowel.
  • Spread no more than 1 m2 at a time to avoid Skin-Over. 
  • Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.
  • Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
  • Allocate joints of approx. 3mm wide between tiles.
  • Remove surplus adhesive from tile surface & joints before it hardens.
  • Set for 24 hours; before grouting commences.
  • Do not use adhesive in temperatures lower than 5ºC or in damp condition.

Consumption is not availble, please have a look at the PDF documentation

Features and benefits

  • Safer working condition
  • Healthy working environment
  • Improved formulation with better workability
  • Improved overall performance


  • Bed thickness : 3 - 6mm
  • Open time : Approx. 10 - 15 Minute
  • Setting time : 24 hours
  • Adjustability Time : 5 minutes – May vary depending on porosity of substrate.
  • Mix Proportion : 1 pbw water to 3 pbw adhesive (6 - 7 ltrs Water or Latex Admixture to 20kg weberset super star (LD))
  • Application Temperature : Above 5°C - 40°C
  • Shelf life : 6 month

This product fits for these following projects