weberset super star

Product formerly named: BELCEM SUPER STAR
Ssuper_star.jpg

Premium grade Ceramic Tile adhesive for internal and external area, mix with weber's range of Latex Admixture for Porcelain tile fixing. 

Documentation and brochures

To know before applying

  • Substrate must be dry, sound, flat / true & free of contaminants.
  • Ceramic Tiles are to be fix dry. Do not soak in water.
  • Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
  • Spread adhesive to the substrate at bed thickness of 3 - 6 mm (may vary depending on tile size & thickness) with suitable notched trowel.
  • Spread no more than 1m2 at a time to avoid Skin-Over.
  • Promptly fix tiles onto adhesive bed, followed by slight twisting
  • action to ensure good contact ie, Solid Bed Fixing.
  • Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
  • Allocate joints of approx. 2 - 3 mm wide between tiles.
  • Remove surplus adhesive from tile surface & joints before it hardens.
  • Set for 24 hours; before grouting commences.

Consumption is not availble, please have a look at the PDF documentation

Features and benefits

  • Premium grade C1 Tile Adhesive
  • Excellent bond strength
  • Contains 100% Silica sand filler
  • Idea for swimming pool & wet area

Constraints

  • Bed thickness : 3 - 6mm
  • Application temperature above 5°C-50°C
  • Open time : Approx. 15 - 20 Minute
  • Setting time is 24 hours
  • Adjustability Time : 10 minutes – May vary depending on porosity of substrate.
  • Mix Proportion : 1 pbw water to 3 pbw adhesive (6 - 7 ltrs Water or Latex Admixture to 20kg weberset super star)
  • Shelf life : 6 month

This product fits for these following projects