webermix multibond

(a) Additive for Cement-Sand Renders & Screeds

Cement-Sand Mortar (for rendering / screeding) can be mixed

with webermix multibond to replace or partially replace

gauging water. Mortars fortified with webermix multibond

have improved adhesion strength, cohesive strength, flexural

strength, abrasion resistant, frost resistant, durability, reduced

water permeability, reduced drying shrinkage, reduced surface dusting, minimizes efflorescence, improved workability etc.

 

Mixing procedure is similar to that of traditional mortar, except

for the partial or total replacement of gauging water with

webermix multibond. A standard mix of 50kg Portland Cement

to 150 - 200 kg Sand (1 : 3 - 4) will require approx. 12 ltrs of

webermix multibond (a little addition of water may be required to adjust working consistency).

 

Do not incorporate workability aids such as lime or mortar

plasticiser; as webermix multibond has a considerable

plasticising action of it’s own. When applying render/screed, ensure that the background is dry, sound & free of contamination ie. dust, grease, laitance etc.

 

Note : It may be necessary to dampen porous surface to control water absorption before applying rendering / screeding mortar.

(b) Patch Repair of Cracked Concrete Saw cut along cracks to create a ‘V’ shape groove of sufficient depth. Clean joints of contaminations. Apply a layer of Bonding Agent, followed by immediate patching with a 1 : 3 - 4 cement-sand mortar modified with webermix multibond. The addition of webermix multibond enables “feather edging” of patching mortar. (c) Steel / Metal Protection Mix 1 part webermix multibond with 1.5 part Portland Cement by volume (similar to Slurry Bond Coat). Brush apply over steel bars, metal plate etc. to prevent rusting. (d) Other Usages • Additive for Bricklaying & Pointing Mortar. • Additive for Tile Bedding / Grouting Mortar (Buttering only).