E.MIX EASI SCREED

screed, floor

Cement-based mortar for levelling of concrete floor and repair of screeding under interior or exterior conditions. Specially blended premixed hydraulic cement and non-reactive aggregate.

40 KG / Bag

Documentation and brochures

To know before applying

  • Substrate must be hard and free from surface contamination
  • Contraction joints and cracks in the substrate which may be subject to movement after installation of EMIX Easi Screed must be maintained as joints in the new surface.
  • Advisable of apply a layer of E.MIX moisture sealer on a high fly as concrete surface as interface modification to reduce the effect to its cover material.
  • Dampen the surface with clean water or clean the surface by using high pressure water jet before priming

(refer to our Technical data sheet & Method statement for procedures in detail)

Consumption is not availble, please have a look at the PDF documentation

Features and benefits

  • ready-to-use: Premixed to replace conventional cement sand screed
  • High compressive strength
  • Suitable to for tiling with receiving Weber series tile adhesive and color grout

Constraints

Open time : Approx. 30 minutes
Thickness : 4 -10mm/coat
Coverage : Approx. 1.6kg/m²/mm thick Mixing ration : 5:3:2 (OPC : water : webermix multibond)
Water ration : Approx. 6.8 litres/40kg bag Coat thickness : 5 - 50mm/coat Recommended to wear NIOSH approved or equivalent face mash when mixing the material